1073 Build Pics

[HM1006]

Dan,

The SS flex brake line, that feeds the hard line to the two rear calipers, is run between the pumpkin and the angled frame member.  Mine is an older car, so yours might be different, but some how that brake line got pinched enough to cut the inner hose, and relive itself of all the fluid.

Brad

[danc30]

Thanks for the heads up Brad, Should I run it over the 1" angled piece?

[HM1006]

That's what I did.  I also split about 6" of fuel line, and zip tied it over the brake line at the top, where it might come in contact with the angle piece,... more to protect the frame coating from abrasion.

Brad

[danc30]

Engine is finally here. 622 HP and 630 TQ.

[danc30]

.

[LMH]

Wow! Is the FE just too cool or what! 8-)
Larry

[HM1006]

Engine is finally here. 622 HP and 630 TQ.

[danc30]

I think "scary fun" is the term and I'm gonna love it......

Props to Scott Risseeuw for finding the sway bar info and being the guinea pig for all of us.

Thread here: http://forum.hurricane-motorsports.com/yabb2/YaBB.pl?num=1134491550/31#31

Sway bar came in and I put it on. $300.00 + $25.00 freight from Vintage Performance.
http://www.vintageperformancemotorcars.com/

Talk to Craig, tell him you have a Hurricane and don't need the brackets.  The only thing you need to supply will be the 3" bolts for the bushing brackets and the washers and nuts for them. All you need to do is cut off 5/8" from the back of the shock mount and drill the holes for the bushing clamps.

Looks good to me. Fits like a glove.

[danc30]

.

[danc30]

.

[danc30]

.

[Ryan Cassidy]

Thanks for the information and pictures.  Definately something I'm going to investigate further.  Does anyone have a before and after driving impression they could share?

Cheers,

[danc30]

Engine fits . This looks like an engine with wheels LOL  .

[danc30]

.

[danc30]

.