News:

Welcome to the NEW Hurricane Motorsports discussion group.
Take time to browse around and get familiar.
Very similar to the previous forum but
there are some subtle differences

Main Menu

Hurricane: Which Cobra?

Started by kwilly, April 13, 2010, 04:22:59 PM

Previous topic - Next topic

kwilly

I know there were variations in many aspects of the original Cobra models (Shelby and AC versions) over the years.

Paul Proefrock

Kevin
The basic body shape of an S/C and a street car are essentially the same, few minor variances.  Many of the street cars were modified to become S/C variants since they commanded a little more $$$.

Depending on how you build the kit, you can do either a 427 S/C or a 427 Street version. They offer both. The primary difference is the exhaust. If you really get into detail; taillights, dash, ash tray, oil cooler, bumpers, hood, etc.

The red car on the website is Jason's street car. Has an underslung exhaust system. Really a good looking car. Likely to be in London this year, along with the factory car

Bottom line, the basic body is the same, with a few minor changes.

Paul
https://65shlb.com   Documentation of a period correct build
https://prdcrrct.com  Affordable period correct components

kwilly

Hi, Paul.

So, at some point, somebody made the mold that the Hurricane body comes out of.

Combat72

#3
Check out the link below.  Hopefully it will answer your question.

http://hm-cobra.proefrock.net/smf_forum/index.php?PHPSESSID=34e07935c6c7e64395cc7ac58c7ea699&topic=118.0

Frank

Paul Proefrock

The Hurricane mold came from an original CSX car. The particular car has been narrowed to about one of three cars. We are not at liberty to disclose these yet - hopefully in the very near future.

Until then, it was splashed from an original. The S/C and street cars are basically the same thing, again with just minor variations.  If you really look into the details of these cars, every one of them was a little different from the next. There are all kinds of variations. In reality, each one was hand built and if a problem arose, they worked around it. We end up with 1000 "different" "exactly the same" cars.

Paul
https://65shlb.com   Documentation of a period correct build
https://prdcrrct.com  Affordable period correct components

kwilly

#5
Wow.

Fuzzy

Even on the orginals, there was never two that were 100% alike, all the bodies differed a bit here and there, not even perfectly symetrical from side to side.  All the original's bodies were hand built  so that was why no two were ever exactly the same.  Visually, they were close to the same given the 50/50 test.  ;)

ken
HM1081:)   aging gracefully in the garage