HM1064 Engine finished

Mike Watts · January 20, 2007, 04:17:09 PM

The engine is finished and ready to install. New pictures of engine.

Mike Watts · January 20, 2007, 04:18:44 PM

Another pic 8-)

Mike Watts · January 20, 2007, 04:21:12 PM

One more pic

danc30 · January 20, 2007, 07:35:45 PM

Looks nice. What kind of HP and TQ are you expecting?

LMH · January 20, 2007, 08:34:57 PM

Very nice! I love that black/bright look.
Larry

66rdster · January 20, 2007, 08:42:16 PM

Nice work Mike. It looks great!!!!

Mike

chris B · January 20, 2007, 10:05:30 PM

crazy how close our engines are given how close our cars are HM1069

chris B · January 20, 2007, 10:06:34 PM

and another

Mike Watts · January 21, 2007, 12:05:32 AM

Chris,
How much HP did your engine make on the dyno?? Our engines look very simular.
What kind of transmission are you using? Mine is a T-5Z with a .63 overdrive.

MFE III · January 21, 2007, 02:31:05 PM

Chris, I noticed in the picture of your exhaust ports that you're gonna run into the same problem I and a few others did with the HM supplied headers.

chris B · January 21, 2007, 08:52:25 PM

good eye

and thanks for bringing it up if i had not allready caught it i would have been

to get stock headers

but i have sent my header flanges to in so they can build custom headers thanks very much for chiming in though

the hp from the 302 is 457HP from 4500RPM to 6100
TQ was 450 same RPM range

chris B · January 21, 2007, 08:54:03 PM

QuoteChris,

cobraspit · June 06, 2007, 09:23:52 PM

SAWEET!
fool ill be there or dead.
so nice VROOM! got to be Stoked or stroked.
have gas will travel
have fun dont burn yourself.
cobraspit.

News:

HM1064 Engine finished