1
For Sale / Carpet Kit Complete - Now $200
« on: December 26, 2024, 03:02:04 PM »
Never installed complete pre-cut black carpet kit with padding, includes trunk carpet. Now $200 plus ship
News:
Welcome to the NEW Hurricane Motorsports discussion group.
Take time to browse around and get familiar.
Very similar to the previous forum but
there are some subtle differences
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
For Sale / Wind Wings - New In Box $60 (SOLD)
« on: December 26, 2024, 02:59:57 PM »
Complete pair of wind wings and hardware, never mounted. Now $60 plus ship
3
For Sale / Sun Visors - New in Box $60 (Sold)
« on: December 26, 2024, 02:58:49 PM »
Tinted and new in box, never mounted. Now $60 plus ship
4
For Sale / Wanted - Door Latch Wedge
« on: July 26, 2024, 02:08:27 PM »
Anyone have one of these wedges with stud?
5
For Sale / HM-2014 For Sale
« on: January 24, 2024, 06:35:50 PM »
On Facebook...link will work for all. https://www.facebook.com/marketplace/item/190818197421419
6
For Sale / Hurricane's Demo Coyote Powered Roadster HM2024
« on: February 03, 2023, 02:45:47 PM »
Demo Coyote has made way for ebikes... See Ebay Add Here
https://newwayebikes.com https://www.facebook.com/newwayebikes
https://newwayebikes.com https://www.facebook.com/newwayebikes
7
For Sale / All Sold - Parts For Sale
« on: February 20, 2022, 06:53:01 PM »
Energy Suspension Trans Mount New Part No. 4.1104G - $30 plus shipping
L539 Amber Winged Lights - $60 plus ship
Filler Neck with Cap - $30 plus ship
Flip Top Fuel Cap - $100.00 plus ship
L539 Amber Winged Lights - $60 plus ship
Filler Neck with Cap - $30 plus ship
Flip Top Fuel Cap - $100.00 plus ship
8
Build Pictures / HM-2030 Build Log - The Storm Ahead
« on: August 25, 2020, 07:32:02 PM »
I figured today was good as any to get this started even though it'll be at least 8 weeks before my kit is ready. My build plan starts out fairly basic with a few personal modifications that'll make it different in some ways.
So starting off, the order was made after my visit and started out with the 427 kit with the following:
- Alum Firewall back of dash that will be powder coated
- Powder coated frame, powder coat will be the same hammered or silver vein used on the coyote build. Will also coat the latch backing plate
- Premium carpet
- Undercoating of the cockpit and trunk tub
- Upgraded aluminum fuel tank
- Upgraded front calipers to Wilwood D154
- Standard brake package for rear axle
- Eaton Detroit Tru-Trac LSD (3.50 Gear ratio)
- Roll bar and Quick Jacks to be chrome
- Roll Bar trim rings
- Wind Wings & Sun Visors
- LED rear tail lights
- Ceramic coated side pipes and headers
- Gauge Package Delete
- Wire Harness, switches, & Indicator Lights Delete
- Mirror Delete
- Shift Lever & Knob Delete
- Seats & Harness Delete
- Will be adding mounting tabs to the frame at specific locations for eye bolt anchors. These will be used for a clip in style safety harness.
- Utilizing a programmable solid state power distribution module with remote switch panel eliminating fuses and relays. Small fuse panel will still be necessary for brake switch and some other items.
- I plan on using the aluminum cobra bucket seats from Ultra Shield pictured below.
- Working on dash layout, preliminary layout pictured below. Gauges will be from Speedhut, but using dual gauge speedo with fuel level, tach, oil pressure, water temp and volts.
- Shift lever which I posted in another thread is the Jordan shifter.
- Planned power is 347 SBF w/ carb from Prestige Motorsports mated to a modified T-5, hydraulic slave for clutch.
- Superlite wheels, 15x10 rear and 15x8 front. Have always liked these wheels and found a good example of a roadster with them bolted on pictured below.
As for color, will be solid color no stripes, started out as race red, then I changed to a solid Porsche non metallic blue from the 60's, but came across HM-1001 pictured below after it was repaired and changed to silver, really liking the stance and look of this one. So it may be silver, but who knows, the color may change again. My side pipe coating as of now is silver, but most likely will change it to black like HM-1001.
Will update when I can as the build progresses and from updates or pics I can get from the guys at Hurricane.
So starting off, the order was made after my visit and started out with the 427 kit with the following:
- Alum Firewall back of dash that will be powder coated
- Powder coated frame, powder coat will be the same hammered or silver vein used on the coyote build. Will also coat the latch backing plate
- Premium carpet
- Undercoating of the cockpit and trunk tub
- Upgraded aluminum fuel tank
- Upgraded front calipers to Wilwood D154
- Standard brake package for rear axle
- Eaton Detroit Tru-Trac LSD (3.50 Gear ratio)
- Roll bar and Quick Jacks to be chrome
- Roll Bar trim rings
- Wind Wings & Sun Visors
- LED rear tail lights
- Ceramic coated side pipes and headers
- Gauge Package Delete
- Wire Harness, switches, & Indicator Lights Delete
- Mirror Delete
- Shift Lever & Knob Delete
- Seats & Harness Delete
- Will be adding mounting tabs to the frame at specific locations for eye bolt anchors. These will be used for a clip in style safety harness.
- Utilizing a programmable solid state power distribution module with remote switch panel eliminating fuses and relays. Small fuse panel will still be necessary for brake switch and some other items.
- I plan on using the aluminum cobra bucket seats from Ultra Shield pictured below.
- Working on dash layout, preliminary layout pictured below. Gauges will be from Speedhut, but using dual gauge speedo with fuel level, tach, oil pressure, water temp and volts.
- Shift lever which I posted in another thread is the Jordan shifter.
- Planned power is 347 SBF w/ carb from Prestige Motorsports mated to a modified T-5, hydraulic slave for clutch.
- Superlite wheels, 15x10 rear and 15x8 front. Have always liked these wheels and found a good example of a roadster with them bolted on pictured below.
As for color, will be solid color no stripes, started out as race red, then I changed to a solid Porsche non metallic blue from the 60's, but came across HM-1001 pictured below after it was repaired and changed to silver, really liking the stance and look of this one. So it may be silver, but who knows, the color may change again. My side pipe coating as of now is silver, but most likely will change it to black like HM-1001.
Will update when I can as the build progresses and from updates or pics I can get from the guys at Hurricane.
9
General Questions / My Visit to Hurricane
« on: August 15, 2020, 11:57:40 AM »
What a fun day and seeing the process of these kits and cars come together. I can't thank Alec enough for spending the whole day on Friday going over all sorts of things and answering my questions.
Some pics form my morning arrival...
Some pics form my morning arrival...
10
For Sale / Parts & Spares
« on: March 09, 2020, 03:01:19 PM »
Not mine and do not know the history...https://kansascity.craigslist.org/cto/d/blue-springs-hurricane-motorsports/7089928149.html
11
General Questions / Activity
« on: January 19, 2020, 08:54:38 AM »
It's been kinda quiet in here....what are you guys working on and are there any new builds?
12
Important Information / RCN Driver's Choice Awards
« on: October 24, 2019, 05:14:18 PM »
Hurricane is nominated for two categories...Go Vote https://www.rcnmag.com/drivers-choice
Voting ends Monday.
Voting ends Monday.
13
General Questions / Wheel Selection & Backspace
« on: May 19, 2019, 06:42:36 PM »
I've narrowed wheel selection to 2 types of wheels and need advice on backspacing of front and rear (Bolt On).
Options are 15x8 & 15x10 or 17x8 & 17x9.5 maybe 11.
Thanks
Options are 15x8 & 15x10 or 17x8 & 17x9.5 maybe 11.
Thanks
Pages: [1]