Can anyone tell me the P/N on the clutch MC? Need to look up the bore and stroke so I can choose the correct clutch components.
Your clutch slave should dictate the master cylinder bore and stroke, you can get various masters. What slave do you plan to use?
Quote from: Greg K on June 24, 2021, 12:00:23 PM
Your clutch slave should dictate the master cylinder bore and stroke, you can get various masters. What slave do you plan to use?
Yes. But the clutch MC is already supplied with the kit, so need to know what it is to match.
It's included, but you only have to tell Alec what size you need. Same with the brake master cylinders if you want as well.
Quote from: Greg K on June 24, 2021, 12:27:54 PM
It's included, but you only have to tell Alec what size you need. Same with the brake master cylinders if you want as well.
Hmmmmmm. I talked to him this morning and he failed to tell me that. Said he was going to take a picture of the part and send, but think he's traveling and I wanted to get stuff ordered today. I'll give him another call.
Looks like they are using the GS compact? Can anyone verify? Then I can look and see what sizes are available.
Bruce,
They are now using the compact, not the GS compact. Reservoir is mounted remotely.
Here is the link: https://www.wilwood.com/MasterCylinders/MasterCylinderList?group=Compact%20Remote%20Master%20Cylinder
You can use whatever MC you want (I think). Not sure about the new wilwood pedal setup. I used the original cobra style pedals made by Hurricane, then made new longer set for my raised floor.
My wilwood MC is "0.75" bore. Wilwood part# 260-6089
RAM Clutch and
Tilton internal HTOB part# 60-6102
(http://bobworley.com/images/hm2008/clutch/IMG_9600.JPG)
(http://bobworley.com/images/hm2008/pedals/IMG_9444.JPG)
we are currently supplying the compact remote master cylinders. the GS series should work as well. and they have a threaded supply line that I like.
Quote from: Kruse on June 25, 2021, 06:32:25 AM
we are currently supplying the compact remote master cylinders. the GS series should work as well. and they have a threaded supply line that I like.
Thanks. Can you tell me what size you are supplying with the kit? I was never given an option for size, so assume you have a standard size that you are supplying?
3/4
Quote from: Bob Worley on June 24, 2021, 05:00:11 PM
You can use whatever MC you want (I think). Not sure about the new wilwood pedal setup. I used the original cobra style pedals made by Hurricane, then made new longer set for my raised floor.
My wilwood MC is "0.75" bore. Wilwood part# 260-6089
RAM Clutch and
Tilton internal HTOB part# 60-6102
(http://bobworley.com/images/hm2008/clutch/IMG_9600.JPG)
(http://bobworley.com/images/hm2008/pedals/IMG_9444.JPG)
Thanks Bob. I looked up your P/N and it calls yours a compact remote also. Except yours has .61 volume where as the one in the picture Kruse sent me is only .49 for the 3/4. Ether way is good though. I just needed .45 to work the setup Im using. I may go your route though, so I can use AN lines as opposed to hose and hose clamps.