Hey guys,
For those of you who have installed the aluminum fuel cell, what kind of product did you use to seal the cork gasket for the sending unit to the tank?
When I built the airplane we used a product called pro seal to seal the fuel tanks. It's a messy bear to work with but it seals well. I was thinking of using that but if there is something easier to use that I can just buy at NAPA, let me know.
Also, did you all use the supplied screws or did you use something else to hold the sending unit in place?
I used Sealall on mine. Gas and oil resistant. You can get this at most auto part stores. I also used it to seal the vent fitting on my fuel tank as well. Who ever tapped the bung overran the tap for a NPT thread that is supposed to be tapered.
There were no screws supplied with my sending unit. I believe they are 10-24 screws. Supplied my own.
Russ
Aaron, if you have some ProSeal, go for it. Works great. I've also use SealAll and PermaTex Moto-Seal.
There are a limited number of sealants that will not breakdown with prolonged exposure to liquid gasoline.
Paul
I used gasket shellac on mine. gas and oil proof....
https://www.permatex.com/products/gasketing/gasket-sealants/permatex-indian-head-gasket-shellac-compound/ (https://www.permatex.com/products/gasketing/gasket-sealants/permatex-indian-head-gasket-shellac-compound/)
Evan
HM 1103
Just installed the fuel tank level sending unit this week. I used the Pematex Pemashield. Pematex indicates it is comparable to Hylomar Universal Blue developed for Daimler Benz. It never completely dries or hardens. About $9 at NAPA.
Time will tell how well it works.