I need a picture of the master cylinder support, out of the car, if possable. Any help would be appriciated.
Thanks Carl
Carl,
What do you mean by master cylinder support? The stock set-up is to simply bolt it through the engine bay side of the footbox. Some people fabricated their "bezel" to give it a finished look. Is that what you're referring to?
Carl, the support is the pedal assembly from Wilwood.
what I am looking for is the part that the wilwood assembly bolts to. it is bolted to the bottom of the foot box and the dash support .
Thanks Carl.
Are you refering to the metal bracket that goes inside the footbox up against the fire wall it has the 3 holes at the top to mount the masters through ?
I haven't done that part yet so I have all the parts somewhere, give me a good description of what it looks like or a page number in the manual and I will take photos and post them for you...Ken
Looks like he is scratch building one. I am guessing he doesn't have a manual.
Dan
Correct - reverse engineering.
It's on page 82 of the manual and refered to as pedal mounting plate, and yes I am reverse engineering the frame, and yes I bought the manual too. There are pictures of my build on Club Cobra, I use the same name there also.
Thanks for the help. Carl