Text only | Text with Images

Hurricane Motorsports

Public Area => General Information => Topic started by: KevinM on August 04, 2007, 08:43:32 AM

Title: Wheel Bolt Circle
Post by: KevinM on August 04, 2007, 08:43:32 AM
Does the Hurricane with an IRS use different bolt circle wheels front and back?

The front end seems to be GM based, which would be a 4 3/4" bolt circle.
Title: Re: Wheel Bolt Circle
Post by: Mike Watts on August 04, 2007, 11:51:16 AM
 :) Ford rims front and back, both sets are 4.5 inch bolt circle.
Title: Re: Wheel Bolt Circle
Post by: KevinM on August 04, 2007, 12:52:13 PM
Mike,

So they use a Ford spindle and rotor with a GM caliper on the front?

Kevin
Title: Re: Wheel Bolt Circle
Post by: Eric on August 04, 2007, 03:39:15 PM
QuoteSo they use a Ford spindle and rotor with a GM caliper on the front?
Correct.
Title: Re: Wheel Bolt Circle
Post by: Rich Burroughs on August 06, 2007, 01:25:38 PM
All of our kits ship with 5 lug 4.5" ford bolt pattern in the front and rear (both the 9" and IRS). It is very common to use the GM Metric caliper with the spindles we use. Pads and aftermarket parts are inexpensive and readily available.
Text only | Text with Images