Still playing with the upholstery work so I needed a break - back to turning some wrenches. Spent the weekend bending sheetmetal and fabricating the oil cooler shroud and installing the pusher fans.
(http://3x2csx.com/Build/Images/IMG_5540.JPG)(http://3x2csx.com/Build/Images/IMG_5535.JPG)
More pictures and details at Oil Cooler (http://3x2csx.com/Build/Oil_Cooler.htm) and Fans (http://3x2csx.com/Build/Fans.htm)
The cooler is an Earl's 6 row, same size as the original Mocal, installed on an angle. The floor of the opening is recessed like originals. Twin fans are self-fabricated. There is a 1/4" stainless mesh screen in front of the radiator to give it a little protection from flying rocks, little kids, slow dogs and ricer's