« previous next »
Pages: [1] 2 3 ... 7

Author Topic: HM2006 Build  (Read 15141 times)

mandmGuys

  • Hurricane Owner
  • *
  • Posts: 268
  • Hurricane Motorsports
    • View Profile
    • Email
HM2006 Build
« on: July 10, 2012, 04:03:31 pm »
Sorry running a little behind getting things set up. Pictures of HM2006 can be seen and followed at http://s1060.photobucket.com/albums/t459/TMark390/

Always up for ideas to consider or pitfalls to watch out for.

See my post in the Suspension section for a question I posted about swaping to leading caliper by fliping brake backing plates - Let me know what you think.

Mark
Logged

s_reynolds

  • Hurricane Owner
  • *
  • Posts: 626
    • View Profile
    • Email
Re: HM2006 Build
« Reply #1 on: July 10, 2012, 05:38:56 pm »
Mark, really enjoyed reviewing your build pics. You all are doing an outstanding job on your build. I have one of the "original" Hurricanes and my frame, body, and and general fit of the parts was good, but based on your detail build pics it is amazing how much the current Hurricane guys have improved over the "originals". The body and tub parts look to be near perfect. Keep us updated! Thanks.

Regards, Sam
Logged

mandmGuys

  • Hurricane Owner
  • *
  • Posts: 268
  • Hurricane Motorsports
    • View Profile
    • Email
Re: HM2006 Build
« Reply #2 on: September 24, 2012, 04:17:48 pm »
I guess I need to update, been busy the last two weekends
Tub is now mounted and insulated (interior) where birdcage  will be.

Engine side of firewall & footboxes insulated and covered with aluminum.

Replace stock rocker peds and springs with billet stands and spacers.
Logged

mandmGuys

  • Hurricane Owner
  • *
  • Posts: 268
  • Hurricane Motorsports
    • View Profile
    • Email
Re: HM2006 Build
« Reply #3 on: September 24, 2012, 04:23:51 pm »
Before someone asks about the missing pedal here it is ;D
Logged

mandmGuys

  • Hurricane Owner
  • *
  • Posts: 268
  • Hurricane Motorsports
    • View Profile
    • Email
Re: HM2006 Build
« Reply #4 on: December 10, 2012, 01:52:34 pm »
Here is HM2006 on it's own feet for the first time.

Wiring and engine hook up continues  - headed for first start.


Link to all my build photos. http://s1060.photobucket.com/albums/t459/TMark390/
Logged

Russ Rittimann

  • Hurricane Owner
  • *
  • Posts: 233
  • Hurricane Motorsports
    • View Profile
    • Email
Re: HM2006 Build
« Reply #5 on: December 11, 2012, 07:55:29 am »

Looking really good Mark!!!  You're way ahead of me.  Keep up the good work and progress.

Russ
Logged
Russ
HM-2005
KC-408, Tremec 600, IRS

HAVASUBILL

  • Hurricane Owner
  • *
  • Posts: 665
  • #1072 , 428FE, TKO600  Everyday is Saturday!
    • View Profile
    • Email
Re: HM2006 Build
« Reply #6 on: December 12, 2012, 07:27:37 am »
Very nice job Mark, I enjoyed looking at all your pictures and observed the high degree of quality you put into the car.  Your build is very clean and straight forward, I think your pictures could easily be in the Hurricane Manual for future builders.    ;)

Best of luck, can'tr wait to see the finished product.

Bill
Logged
The trouble with people is not that they don't know , but that they know so much that ain't so.

mandmGuys

  • Hurricane Owner
  • *
  • Posts: 268
  • Hurricane Motorsports
    • View Profile
    • Email
Re: HM2006 Build
« Reply #7 on: January 02, 2013, 07:33:32 am »
Got the inner fender panels and radiator mounted over the holidays. I had to make some changes to the kit peices to clear the headers and steering shaft.
Pass side.



Driver side.

Logged

builder

  • Global Moderator
  • *
  • Posts: 169
  • Hurricane Motorsports
    • View Profile
    • Email
Re: HM2006 Build
« Reply #8 on: January 02, 2013, 09:01:19 am »
Mark,

You and your dad are doing a great job! Looks like it should!!! I can't wait till you can fire it up and take for a first go cart ride. Hope you had a Happy New Year!

Dusty
Logged

Paul Proefrock

  • Administrator
  • *
  • Posts: 793
  • HM 1078
    • View Profile
    • 65SHLB Build Info
    • Email
Re: HM2006 Build
« Reply #9 on: January 02, 2013, 06:37:36 pm »
M & M
Expand on the finish on your panels. It appears to be brushed? How? and with what?

Looks great

Paul
Logged
https://65shlb.com   Documentation of a period correct build
https://prdcrrct.com  Affordable period correct components

s_reynolds

  • Hurricane Owner
  • *
  • Posts: 626
    • View Profile
    • Email
Re: HM2006 Build
« Reply #10 on: January 03, 2013, 07:17:28 am »
Paul, not sure how Mark did his, but I did mine with a Scotbrite pad on a wood block and used WD40 as a lub to get the same look. It gives a nice even brushed look.

Sam
Logged

mandmGuys

  • Hurricane Owner
  • *
  • Posts: 268
  • Hurricane Motorsports
    • View Profile
    • Email
Re: HM2006 Build
« Reply #11 on: January 04, 2013, 07:37:59 am »
Paul, dad did the panels he used course(red), fine(grey) and super fine(white) levels of scotch bright pads then used a polish pad and some rubbing compound on a drill motor then finished with a little hand paste wax to preserve the look. He used wet/dry sand paper to get out really bad scratches, then even up with the course, use the fine to the desired brushed finish and clean up with the fine. The rubbing compound and wax bring back some shine. We only did the engine side as we thought we might want to put some coating in the wheel well area.

Mark
Logged

trainer7620

  • Hurricane Owner
  • *
  • Posts: 320
    • View Profile
    • Email
Re: HM2006 Build
« Reply #12 on: January 04, 2013, 07:35:45 pm »
Mark, that all looks great!  one comment though, your garage is waaayyy too clean. :D

George
Logged

mandmGuys

  • Hurricane Owner
  • *
  • Posts: 268
  • Hurricane Motorsports
    • View Profile
    • Email
Re: HM2006 Build
« Reply #13 on: January 07, 2013, 09:25:30 am »
Got rad top, horns and upper hose installed, little more wiring and working on accel brackets and fresh air vents.
« Last Edit: January 07, 2013, 09:27:07 am by mandmGuys »
Logged

mandmGuys

  • Hurricane Owner
  • *
  • Posts: 268
  • Hurricane Motorsports
    • View Profile
    • Email
Re: HM2006 Build
« Reply #14 on: January 21, 2013, 08:38:42 am »
Drive Shaft installed:

Got fresh air vent duct fittings made and installed:


About ready to test fit the body, list is gitting short on things to complete before start up.

Mark
Logged
Pages: [1] 2 3 ... 7
« previous next »